 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NC7SZU04 TinyLogic UHS Unbuffered Inverter October 1996 Revised August 2004 NC7SZU04 TinyLogic UHS Unbuffered Inverter General Description The NC7SZU04 is a single unbuffered inverter from Fairchild's Ultra High Speed Series of TinyLogic. The special purpose unbuffered circuit design is primarily intended for crystal oscillator or analog applications. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. Features s Space saving SOT23 or SC70 5-lead package s Ultra small MicroPak leadless package s Unbuffered for crystal oscillator and analog applications s Balanced Output Drive; 16 mA at 4.5V VCC s Broad VCC Operating Range; 1.65V-5.5V s Low Quiescent Power; ICC < 2 A, VCC = 5.5V, TA = 25C Ordering Code: Order Number NC7SZU04M5X NC7SZU04P5X NC7SZU04L6X Package Number MA05B MAA05A MAC06A Product Code Top Mark 7ZU4 ZU4 C5 Package Description 5-Lead SOT23, JEDEC MO-178, 1.6mm 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 3k Units on Tape and Reel 5k Units on Tape and Reel Logic Symbol IEEE/IEC Connection Diagrams Pin Assignments for SOT23 and SC70 Pin Descriptions Pin Names A Y NC Description Input Output No Connect Pad Assignments for MicroPak (Top View) Function Table Y=A Input A L H H = HIGH Logic Level L = LOW Logic Level Output Y H L (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. (c) 2004 Fairchild Semiconductor Corporation DS012166 www.fairchildsemi.com NC7SZU04 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC ) DC Input Voltage (VIN) DC Output Voltage (VOUT) DC Input Diode Current (IIK) @ VIN < -0.5V @ VIN > VCC + 0.5V DC Output Diode Current (IOK) @ VOUT < -0.5V @ VOUT > 0.5V, VCC = GND DC Output Current (IOUT) DC VCC/GND Current (ICC/IGND) Storage Temperature (TSTG) Junction Temperature under Bias (TJ) Junction Lead Temperature (TL); (Soldering, 10 seconds) Power Dissipation (PD) @ +85C SOT23-5 SC70-5 200 mW 150 mW 260C -0.5V to +6V -0.5V to +6V -0.5V to +6V -50 mA +20 mA -50 mA +50 mA 50 mA 100 mA -65C to +150C 150C Recommended Operating Conditions (Note 2) Supply Voltage Operating (VCC) Supply Voltage Data Retention (VCC) Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature (TA) Thermal Resistance (JA) SOT23-5 SC70-5 300C/W 425C/W 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V 0V to VCC -40C to +85C Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VCC (V) 1.8 to 2.7 3.0 to 5.5 1.8 to 2.7 3.0 to 5.5 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 VOL LOW Level Output Voltage 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 IIN ICC ICCPEAK Input Leakage Current Quiescent Supply Current Peak Supply Current in Analog Operation 0 to 5.5 1.65 to 5.5 1.8 2.5 3.3 5.0 2 4 10 30 mA 1.55 1.6 2.1 2.7 4.0 1.29 1.9 2.4 2.3 3.8 1.65 1.8 2.3 3.0 4.4 1.52 2.14 2.75 2.61 4.13 0.0 0.0 0.0 0.0 0.0 0.08 0.10 0.17 0.25 0.26 0.1 0.2 0.2 0.3 0.5 0.24 0.3 0.4 0.55 0.55 1 2.0 Min 0.85 VCC 0.8 VCC 0.15 VCC 0.2 VCC 1.55 1.6 2.1 2.7 4.0 1.29 1.9 2.4 2.3 3.8 0.1 0.2 0.2 0.3 0.5 0.24 0.3 0.4 0.55 0.55 10 20 A A V VIN = VCC IOL = 4 mA IOL = 4 mA IOL = 8 mA IOL = 12 mA IOL = 16 mA VIN = 5.5V, GND VIN = 5.5V, GND VOUT = Open VIN = Adjust for Peak ICC Current V VIN = VIH IOL = 100 A V IOH = -4 mA IOH = -4 mA VIN = GND IOH = -8 mA IOH = -12 mA IOH = -16 mA V VIN = VIL IOH = -100 A TA = +25C Typ Max TA = -40C to +85C Min 0.85 VCC 0.8 VCC 0.15 VCC 0.2 VCC Max Units V V Conditions www.fairchildsemi.com 2 NC7SZU04 AC Electrical Characteristics Symbol tPLH, tPHL Parameter Propagation Delay VCC (V) 1.65 1.8 2.5 0.2 3.3 0.3 5.0 0.5 tPLH, tPHL CIN CPD Input Capacitance Power Dissipation Capacitance Propagation Delay 3.3 0.3 5.0 0.5 0 3.3 5.0 Min 1.0 1.0 0.8 0.5 0.5 1.0 0.8 4.5 6.3 9.5 TA = +25C Typ Max 11.7 8.5 6.2 4.5 3.9 6.0 5.0 TA = -40C to +85C Min 1.0 1.0 0.8 0.5 0.5 1.0 0.8 Max 12.1 9.0 6.5 4.8 4.1 6.5 5.5 ns pF pF (Note 3) Figure 2 CL = 50 pF, RL = 500 Figures 1, 3 ns CL = 15 pF, RL = 1 M Figures 1, 3 Units Conditions Figure Number Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500 ns FIGURE 1. AC Test Circuit Application Note: When operating the NC7SZU04's unbuffered output stage in its linear range, as in oscillator applications, care must be taken to observe maximum power rating for the device and package. The high drive nature of the design of the output stage will result in substantial simultaneous conduction currents when the stage is in the linear region. See the ICCPEAK specification in the DC Electrical Characteristics table. Input = AC Waveform; tr = tf = 1.8 ns; PRR = variable; Duty Cycle = 50% FIGURE 3. AC Waveforms FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7SZU04 Tape and Reel Specification TAPE FORMAT for SOT23 and SC70 Package Tape Designator M5X, P5X Section Leader (Start End) Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm DIM A 0.093 (2.35) 0.130 (3.3) DIM B 0.096 (2.45) 0.130 (3.3) DIM F (3.5 0.10) (3.5 0.05) DIM Ko (1.35 0.10) (1.4 0.11) DIM P1 0.157 (4) 0.157 (4) DIM W 0.315 0.004 (8 0.1) 0.315 0.012 (8 0.3) 0.138 0.004 0.053 0.004 0.138 0.002 0.055 0.004 www.fairchildsemi.com 4 NC7SZU04 Tape and Reel Specification TAPE FORMAT for MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) (Continued) Number Cavities 125 (typ) 5000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/-0.000 (8.40 + 1.50/-0.00) W2 0.567 (14.40) W3 W1 + 0.078/-0.039 (W1 + 2.00/-1.00) 5 www.fairchildsemi.com NC7SZU04 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B www.fairchildsemi.com 6 NC7SZU04 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A 7 www.fairchildsemi.com NC7SZU04 TinyLogic UHS Unbuffered Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com |
Price & Availability of NC7SZU04P5X
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |